Model/Brand/Package
Category/Description
Inventory
Price
Data
-
![]()
Category: Plug in resistorDescription: HB Series high voltage, metal ceramic film high reliability, low value, low noise, flame-retardant epoxy coating resistance tolerance | ± 1% -------- | Temperature coefficient | ± 100ppm/° C Operating temperature | 0 ° C →+125 ° C Insulation resistance | 106M Ω# # # Radial/surface installation at 500V DC22871+$59.800010+$57.2000100+$56.7320250+$56.3680500+$55.79601000+$55.53602500+$55.17205000+$54.8600 -
![]()
Category: Plug in resistorDescription: ARCOL/OHMITE AP101 270R J Through Hole Resistor, High Power, 270Ω, 700V, TO-247, 100W, ± 5%, AP101 Series32955+$12.460550+$11.9280200+$11.6298500+$11.55531000+$11.48072500+$11.39555000+$11.34237500+$11.2890 -
![]()
Category: Plug in resistorDescription: ARCOL/OHMITE AP101 62R J Through Hole Resistor, High Power, 62Ω, 700V, TO-247, 100W, ± 5%, AP101 Series27311+$40.854110+$38.5101100+$36.7687250+$36.5008500+$36.23291000+$35.93162500+$35.66375000+$35.4962 -
![]()
Category: Plug in resistorDescription: ARCOL/OHMITE AP101 22R J Through Hole Resistor, High Power, 22Ω, 700V, TO-247, 100W, ± 5%, AP101 Series67905+$12.460550+$11.9280200+$11.6298500+$11.55531000+$11.48072500+$11.39555000+$11.34237500+$11.2890 -
![]()
Category: Plug in resistorDescription: Thick film resistor 680 Ω± 5% 100W669410+$10.9980100+$10.4481500+$10.08151000+$10.06322000+$9.98995000+$9.89827500+$9.824910000+$9.7882 -
![]()
Category: Plug in resistorDescription: Thick film resistor 1k Ω± 5% 100W13001+$44.122510+$41.5909100+$39.7103250+$39.4209500+$39.13161000+$38.80612500+$38.51685000+$38.3360 -
![]()
Category: Plug in resistorDescription: ARCOL/OHMITE AP101 51R J Through Hole Resistor, High Power, 51Ω, 700V, TO-247, 100W, ± 5%, AP101 Series38831+$40.854110+$38.5101100+$36.7687250+$36.5008500+$36.23291000+$35.93162500+$35.66375000+$35.4962 -
![]()
Category: Plug in resistorDescription: Thick film resistor 7.5k Ω± 5% 100W585410+$10.9980100+$10.4481500+$10.08151000+$10.06322000+$9.98995000+$9.89827500+$9.824910000+$9.7882 -
![]()
Category: Plug in resistorDescription: ARCOL/OHMITE AP101 68R J Through Hole Resistor, High Power, 68Ω, 700V, TO-247, 100W, ± 5%, AP101 Series23921+$40.854110+$38.5101100+$36.7687250+$36.5008500+$36.23291000+$35.93162500+$35.66375000+$35.4962 -
![]()
Category: Plug in resistorDescription: Res Carbon Film POT 10KΩ 20% 0.5W(1/2W) (128 X 20 X 29mm) Pin Thru-Hole84975+$34.069250+$32.6133200+$31.7979500+$31.59411000+$31.39032500+$31.15735000+$31.01177500+$30.8661 -
![]()
Category: Plug in resistorDescription: Thick film resistor 100 Ω± 5% 100W26081+$42.080210+$39.6658100+$37.8722250+$37.5963500+$37.32031000+$37.00992500+$36.73405000+$36.5615 -
![]()
Category: Plug in resistorDescription: Sliding potentiometer 10K Linear27715+$16.438550+$15.7360200+$15.3426500+$15.24431000+$15.14592500+$15.03355000+$14.96337500+$14.8930 -
![]()
Category: Plug in resistorDescription: Thick film resistor 50M Ω± 5% 100W59951+$40.783410+$38.4434100+$36.7050250+$36.4376500+$36.17021000+$35.86932500+$35.60195000+$35.4347 -
![]()
Category: Plug in resistorDescription: ARCOL/OHMITE AP851 100R F Through Hole Resistor, High Power, 100Ω, 420V, TO-220, 50W, ± 1%, AP851 Series529710+$11.4432100+$10.8710500+$10.48961000+$10.47052000+$10.39425000+$10.29897500+$10.222610000+$10.1844 -
![]()
Category: Plug in resistorDescription: HB Series high voltage, metal ceramic film high reliability, low value, low noise, flame-retardant epoxy coating resistance tolerance | ± 1% -------- | Temperature coefficient | ± 100ppm/° C Operating temperature | 0 ° C →+125 ° C Insulation resistance | 106M Ω# # # Radial/surface installation at 500V DC69271+$55.298910+$52.1261100+$49.7690250+$49.4064500+$49.04381000+$48.63592500+$48.27335000+$48.0466 -
![]()
Category: Plug in resistorDescription: Thick film resistor 30 Ω± 5% 100W696410+$10.9644100+$10.4162500+$10.05071000+$10.03242000+$9.95935000+$9.86807500+$9.794910000+$9.7583 -
![]()
Category: Plug in resistorDescription: ARCOL/OHMITE AP101 120R J Through Hole Resistor, High Power, 120Ω, 700V, TO-247, 100W, ± 5%, AP101 Series89205+$12.421950+$11.8910200+$11.5938500+$11.51941000+$11.44512500+$11.36025000+$11.30717500+$11.2540 -
![]()
Category: Plug in resistorDescription: HB Series high voltage, metal ceramic film high reliability, low value, low noise, flame-retardant epoxy coating resistance tolerance | ± 1% -------- | Temperature coefficient | ± 100ppm/° C Operating temperature | 0 ° C →+125 ° C Insulation resistance | 106M Ω# # # Radial/surface installation at 500V DC50875+$31.653250+$30.3005200+$29.5430500+$29.35361000+$29.16422500+$28.94785000+$28.81257500+$28.6772 -
![]()
Category: Plug in resistorDescription: Res Thick Film 4.7M Ohm 1% 2W ±100ppm/℃ Molded Radial Thru-Hole Tray88285+$13.339250+$12.7691200+$12.4499500+$12.37011000+$12.29032500+$12.19915000+$12.14217500+$12.0851 -
![]()
Category: Plug in resistorDescription: Res Wirewound 15Ω 5% 14W 0ppm/°C to 60ppm/℃ Conformal AXL Thru-Hole Tray68665+$5.065225+$4.690050+$4.4274100+$4.3148500+$4.23982500+$4.14605000+$4.108410000+$4.0522 -
![]()
Category: Plug in resistorDescription: Res Wirewound 22Ω 5% 14W 0ppm/°C to 60ppm/℃ Conformal AXL Thru-Hole Tray86995+$4.830325+$4.472550+$4.2220100+$4.1147500+$4.04312500+$3.95375000+$3.917910000+$3.8642 -
![]()
Category: Plug in resistorDescription: C14 Series 14W, axial Tyco C series affordable resistors can consume high power at 40 ° C through relatively small size in harsh environmental conditions. Power at 40 ° C | 14W --- Resistance Tolerance | 5% Temperature Coefficient |>1 Ω 90ppm/° C Operating Temperature | -55 → 200 ° C C Limiting Element Voltage | 650V Body Length | 53.3 mm Body Diameter | 8.5 mm Lead Length | 35 mm Lead Diameter | 0.8 mm ### Enamel axial and radial -2.5 to 50W small high-power resistor series, suitable for harsh environments. Their high stability and reliability make them particularly suitable for protecting circuits. The resistance wire element is wound on a high-purity ceramic substrate and uses a fully welded top cover and lead structure to provide considerable strength and damage resistance. The enamel protective coating has a resistance to all normal cleaning solvents for printed circuit boards. Application instructions. The distance between the bending point of the output end and the shell should not be less than 1.5mm. It is recommended that the minimum bending radius be 1mm. In order to achieve full load rated power consumption, the distance between the end welding and the main body should not be less than 4mm. When cool, enamel has excellent insulation resistance; But as the temperature rises, the resistance coefficient will decrease. Therefore, if a resistor operates at or near maximum temperature, it cannot be classified as an insulation resistance and should not come into contact with any conductive material.76375+$12.037050+$11.5226200+$11.2345500+$11.16251000+$11.09052500+$11.00825000+$10.95677500+$10.9053 -
![]()
Category: Plug in resistorDescription: Winding resistance 680m Ω± 5% 14W69665+$5.930625+$5.491350+$5.1837100+$5.0520500+$4.96412500+$4.85435000+$4.810310000+$4.7444 -
![]()
Category: Plug in resistorDescription: C14 Series 14W, axial Tyco C series affordable resistors can consume high power at 40 ° C through relatively small size in harsh environmental conditions. Power at 40 ° C | 14W --- Resistance Tolerance | 5% Temperature Coefficient |>1 Ω 90ppm/° C Operating Temperature | -55 → 200 ° C C Limiting Element Voltage | 650V Body Length | 53.3 mm Body Diameter | 8.5 mm Lead Length | 35 mm Lead Diameter | 0.8 mm ### Enamel axial and radial -2.5 to 50W small high-power resistor series, suitable for harsh environments. Their high stability and reliability make them particularly suitable for protecting circuits. The resistance wire element is wound on a high-purity ceramic substrate and uses a fully welded top cover and lead structure to provide considerable strength and damage resistance. The enamel protective coating has a resistance to all normal cleaning solvents for printed circuit boards. Application instructions. The distance between the bending point of the output end and the shell should not be less than 1.5mm. It is recommended that the minimum bending radius be 1mm. In order to achieve full load rated power consumption, the distance between the end welding and the main body should not be less than 4mm. When cool, enamel has excellent insulation resistance; But as the temperature rises, the resistance coefficient will decrease. Therefore, if a resistor operates at or near maximum temperature, it cannot be classified as an insulation resistance and should not come into contact with any conductive material.17855+$24.703450+$23.6477200+$23.0565500+$22.90871000+$22.76092500+$22.59205000+$22.48647500+$22.3808 -
![]()
Category: Plug in resistorDescription: C10 Series 10W, axial Tyco C series affordable resistors can consume high power at 40 ° C through relatively small size under harsh environmental conditions | 10W --- | Resistance tolerance | ± 5% temperature coefficient | ± 90ppm/° C operating temperature | \ -55 ° C →+200 ° C Extreme element voltage | 500V main body length | 38.1 mm main body diameter | 8.5 mm lead length | 35 mm lead diameter | 0.8 mm # # # Enamel axial and radial -2.5 to 50W small high-power resistor series, suitable for harsh environments. Their high stability and reliability make them particularly suitable for protecting circuits. The resistance wire element is wound on a high-purity ceramic substrate and uses a fully welded top cover and lead structure to provide considerable strength and damage resistance. The enamel protective coating has a resistance to all normal cleaning solvents for printed circuit boards. Application instructions. The distance between the bending point of the output end and the shell should not be less than 1.5mm. It is recommended that the minimum bending radius be 1mm. In order to achieve full load rated power consumption, the distance between the end welding and the main body should not be less than 4mm. When cool, enamel has excellent insulation resistance; But as the temperature rises, the resistance coefficient will decrease. Therefore, if a resistor operates at or near maximum temperature, it cannot be classified as an insulation resistance and should not come into contact with any conductive material.16005+$23.250250+$22.2566200+$21.7002500+$21.56111000+$21.42202500+$21.26305000+$21.16377500+$21.0643 -
![]()
Category: Plug in resistorDescription: C10 Series 10W, axial Tyco C series affordable resistors can consume high power at 40 ° C through relatively small size under harsh environmental conditions | 10W --- | Resistance tolerance | ± 5% temperature coefficient | ± 90ppm/° C operating temperature | \ -55 ° C →+200 ° C Extreme element voltage | 500V main body length | 38.1 mm main body diameter | 8.5 mm lead length | 35 mm lead diameter | 0.8 mm # # # Enamel axial and radial -2.5 to 50W small high-power resistor series, suitable for harsh environments. Their high stability and reliability make them particularly suitable for protecting circuits. The resistance wire element is wound on a high-purity ceramic substrate and uses a fully welded top cover and lead structure to provide considerable strength and damage resistance. The enamel protective coating has a resistance to all normal cleaning solvents for printed circuit boards. Application instructions. The distance between the bending point of the output end and the shell should not be less than 1.5mm. It is recommended that the minimum bending radius be 1mm. In order to achieve full load rated power consumption, the distance between the end welding and the main body should not be less than 4mm. When cool, enamel has excellent insulation resistance; But as the temperature rises, the resistance coefficient will decrease. Therefore, if a resistor operates at or near maximum temperature, it cannot be classified as an insulation resistance and should not come into contact with any conductive material.73335+$17.848450+$17.0856200+$16.6585500+$16.55171000+$16.44492500+$16.32295000+$16.24667500+$16.1703 -
![]()
Category: Plug in resistorDescription: ARCOL/OHMITE AP836 100R J Through Hole Resistor, High Power, 100Ω, 350V, TO-220, 35W, ± 5%, AP836 Series67235+$21.730450+$20.8018200+$20.2817500+$20.15171000+$20.02172500+$19.87315000+$19.78027500+$19.6874 -
![]()
Category: Plug in resistorDescription: Thick film resistor 10 Ω± 5% 50W11295+$17.049250+$16.3206200+$15.9126500+$15.81061000+$15.70862500+$15.59205000+$15.51927500+$15.4463 -
![]()
Category: Plug in resistorDescription: Thick film resistor 47 Ω± 5% 50W72075+$17.049250+$16.3206200+$15.9126500+$15.81061000+$15.70862500+$15.59205000+$15.51927500+$15.4463 -
![]()
Category: Plug in resistorDescription: ARCOL/OHMITE AP836 15R J Through Hole Resistor, High Power, 15Ω, 350V, TO-220, 35W, ± 5%, AP836 Series71675+$22.027650+$21.0862200+$20.5591500+$20.42731000+$20.29552500+$20.14495000+$20.05087500+$19.9566
